Home / Landscape architects
For landscape architects
A tree staking detail with nothing above grade
The GTI Stake holds the root ball from below and is covered at backfill. The planting reads the way you drew it on day one, and there is no removal note for anyone to forget.
Why specify it
The stakes on most plans never come off
Standard planting guidance says to take stakes and ties off after the first year. On most sites nobody goes back to do it, so the hardware stays on the tree and in every photo of the project.
- No posts, wires or ties in the finished landscape
- No ties left on the trunk
- No removal visit to write into the maintenance period
- Steel rebar that rusts away and returns iron to the soil
- Priced to rival traditional staking systems
Guidance on removal: International Society of Arboriculture, planting a tree.
Patented
US Patent 10,653,079
Issued May 19, 2020. These are drawing sheets from the patent itself.



Spec kit
Detail, written spec and CAD
The PDFs open directly, with no form. Ask for DWG and we email it.
SECTION 32 9400
GTI Tree Stake
PART 1 - GENERAL
1.1 SUMMARY
A. Section contents:
1. Materials and installation methods for subterranean tree staking apparatus. All specifications are subject to change. For details contact product manufacturer.
B. Related Sections:
1. Division 01 - Administrative, procedural, and temporary work requirements
2. Section 32 9000 - Planting
3. Section 32 9100 - Planting Preparation
4. Section 32 9300 - Plants
1.2 REFERENCES
A. ASTM International (ASTM)
1.3 SUBMITTALS
A. Submittals for Review:
1. Product must be the GTI Stake, from Ginger Tree Innovations. Receipt of purchase must be provided to the landscape architect, any field or shop manufactured products from another source shall be rejected. All project orders are on file with Ginger Tree Innovations.
PART 2 - PRODUCT
2.1 MANUFACTURER
A. Details, drawings and specifications are based on products from Ginger Tree Innovations. Refer to Landscape Plans.
B. No substitution is permitted.
2.2 MATERIALS
A. Stakes, Saddle, and stabilizer: ASTM A615, AASHTO M31M/M31, and Grade (40 or 60) steel rebar.
B. Biodegradable - The breakdown of the steel rebar through the process of oxidation is accelerated by the natural and introduced microorganisms located within the soil. Adding mulch, organic planting mix, and microbial organisms will further enhance the degradation. Making the GTI stake 100% biodegradable in time.
PART 3 - INSTALLATION
3.1 TREE PLANTING
A. Refer to Section 32 9000 - Planting or landscape architect planting details for all tree planting specifications. The GTI stake is designed to accommodate all planting techniques.
3.2 INSTALLATION
A. All installation instructions and size requirements can be found on the Ginger Tree Innovations - GTI Stake planting detail. If detail is not available one can be found at www.gingertreeinnovations.com or by emailing info@gingertreeinnovations.com.The written spec names the product, permits no substitution, and asks the contractor to give you the receipt of purchase. All project orders are on file with Ginger Tree Innovations.
CAD request
Email me the DWG detail
Tell us where the detail is going so we send the right files.
Sizing
Sizing for the plant schedule
The detail carries this table, so the contractor orders the right unit for each tree.
| Container | Root ball | GTI stake size |
|---|---|---|
| 10 gal | 16 in | Small |
| 15 gal | 18 in | Small |
| 20 gal | 20 in | Small |
| 25 gal | 22 in | Medium |
| 35 gal | 24 in | Medium |
| 45 gal | 26 in | Large |
| 65 gal | 30 in | Large |
| 100 gal plus | X-Large |
From the GTI Stake detail. One unit per tree.
On the detail
What the notes say
- Install the stakes during tree installation, before backfill.
- The tree should be plumb before staking.
- Hammer each stake until its top rests 1 inch below the top of the root ball.
- For rocky or sandy soils, contact GTI for alternative planting methods.
- The detail covers GTI Stake installation only. Use your own planting details for planting.
Project registration
Tell us where GTI is on a plan
Register the project and we keep it on file, line up supply near the job, and can confirm the purchase when your spec asks the contractor for a receipt.
Review
Open the detail and written spec.
Add the detail
Put the DWG in your library.
Specify
Detail on the sheet, Section 32 9400 in the book.
Register
Tell us the project and tree count.
Confirm
Receipt of purchase at submittal.
Register a project
Want to see it in the ground first?
Photos from the field and the one minute install video.